Signal Slot Qt Thread

QThread inherits QObject. It emits signals to indicate that the thread started or finished executing, and provides a few slots as well.

More interesting is that QObjects can be used in multiple threads, emit signals that invoke slots in other threads, and post events to objects that 'live' in other threads. This is possible because each thread is allowed to have its own event loop.

QObject Reentrancy

1. 8BiTs 매일 코딩 홈페이지. (Qt) Cross Thread Signal and Slots - 2 Get Code.
2. As QAbstractItemView uses AutoConnections, the signals will be queued if they are in another thread. So, AFAIU, the model and view must be in the same thread if things are not to break. It's not impossible that a model would try to insert and remove rows in quick succession.

Signal Slot Qt Thread Holders

Signals and Slots Across Threads Qt supports these signal-slot connection types: Auto Connection (default) If the signal is emitted in the thread which the receiving object has affinity then the behavior is the same as the Direct Connection. Otherwise, the behavior is the same as the Queued Connection.' Important: Please read the Qt Code of Conduct. And it seems to be a multi-thread signal/slot connect issue. 1 Reply Last reply. The recommended way of working with threads in Qt has changed since the documentation was written. It is usually better not to add signals, let alone slots, to QThread. Instead, create a QObject (derived) instance, and call moveToThread on it to move it to the thread. Put your signals and slots in this worker object instead.

QObject is reentrant. Most of its non-GUI subclasses, such as QTimer, QTcpSocket, QUdpSocket, QFtp, and QProcess, are also reentrant, making it possible to use these classes from multiple threads simultaneously. Note that these classes are designed to be created and used from within a single thread; creating an object in one thread and calling its functions from another thread is not guaranteed to work. There are three constraints to be aware of:

• The child of a QObject must always be created in the thread where the parent was created. This implies, among other things, that you should never pass the QThread object (this) as the parent of an object created in the thread (since the QThread object itself was created in another thread).
• Event driven objects may only be used in a single thread. Specifically, this applies to the timer mechanism and the network module. For example, you cannot start a timer or connect a socket in a thread that is not the object's thread.
• You must ensure that all objects created in a thread are deleted before you delete the QThread. This can be done easily by creating the objects on the stack in your run() implementation.

Although QObject is reentrant, the GUI classes, notably QWidget and all its subclasses, are not reentrant. They can only be used from the main thread. As noted earlier, QCoreApplication::exec() must also be called from that thread.

In practice, the impossibility of using GUI classes in other threads than the main thread can easily be worked around by putting time-consuming operations in a separate worker thread and displaying the results on screen in the main thread when the worker thread is finished. This is the approach used for implementing the Mandelbrot and the Blocking Fortune Client example.

Per-Thread Event Loop

Each thread can have its own event loop. The initial thread starts its event loops using QCoreApplication::exec(); other threads can start an event loop using QThread::exec(). Like QCoreApplication, QThread provides an exit(int) function and a quit() slot.

An event loop in a thread makes it possible for the thread to use certain non-GUI Qt classes that require the presence of an event loop (such as QTimer, QTcpSocket, and QProcess). It also makes it possible to connect signals from any threads to slots of a specific thread. This is explained in more detail in the Signals and Slots Across Threads section below.

A QObject instance is said to live in the thread in which it is created. Events to that object are dispatched by that thread's event loop. The thread in which a QObject lives is available using QObject::thread().

Note that for QObjects that are created before QApplication, QObject::thread() returns zero. This means that the main thread will only handle posted events for these objects; other event processing is not done at all for objects with no thread. Use the QObject::moveToThread() function to change the thread affinity for an object and its children (the object cannot be moved if it has a parent).

Calling delete on a QObject from a thread other than the one that owns the object (or accessing the object in other ways) is unsafe, unless you guarantee that the object isn't processing events at that moment. Use QObject::deleteLater() instead, and a DeferredDelete event will be posted, which the event loop of the object's thread will eventually pick up. By default, the thread that owns a QObject is the thread that creates the QObject, but not after QObject::moveToThread() has been called.

If no event loop is running, events won't be delivered to the object. For example, if you create a QTimer object in a thread but never call exec(), the QTimer will never emit its timeout() signal. Calling deleteLater() won't work either. (These restrictions apply to the main thread as well.)

You can manually post events to any object in any thread at any time using the thread-safe function QCoreApplication::postEvent(). The events will automatically be dispatched by the event loop of the thread where the object was created.

Event filters are supported in all threads, with the restriction that the monitoring object must live in the same thread as the monitored object. Similarly, QCoreApplication::sendEvent() (unlike postEvent()) can only be used to dispatch events to objects living in the thread from which the function is called.

Accessing QObject Subclasses from Other Threads

QObject and all of its subclasses are not thread-safe. This includes the entire event delivery system. It is important to keep in mind that the event loop may be delivering events to your QObject subclass while you are accessing the object from another thread.

If you are calling a function on an QObject subclass that doesn't live in the current thread and the object might receive events, you must protect all access to your QObject subclass's internal data with a mutex; otherwise, you may experience crashes or other undesired behavior.

Like other objects, QThread objects live in the thread where the object was created -- not in the thread that is created when QThread::run() is called. It is generally unsafe to provide slots in your QThread subclass, unless you protect the member variables with a mutex.

On the other hand, you can safely emit signals from your QThread::run() implementation, because signal emission is thread-safe.

Signals and Slots Across Threads

Qt Signal Slot Thread Context

Qt supports these signal-slot connection types:

• Auto Connection (default) If the signal is emitted in the thread which the receiving object has affinity then the behavior is the same as the Direct Connection. Otherwise, the behavior is the same as the Queued Connection.'
• Direct Connection The slot is invoked immediately, when the signal is emitted. The slot is executed in the emitter's thread, which is not necessarily the receiver's thread.
• Queued Connection The slot is invoked when control returns to the event loop of the receiver's thread. The slot is executed in the receiver's thread.
• Blocking Queued Connection The slot is invoked as for the Queued Connection, except the current thread blocks until the slot returns.

  Note: Using this type to connect objects in the same thread will cause deadlock.

• Unique Connection The behavior is the same as the Auto Connection, but the connection is made only if it does not duplicate an existing connection. i.e., if the same signal is already connected to the same slot for the same pair of objects, then the connection is not made and connect() returns false.

The connection type can be specified by passing an additional argument to connect(). Be aware that using direct connections when the sender and receiver live in different threads is unsafe if an event loop is running in the receiver's thread, for the same reason that calling any function on an object living in another thread is unsafe.

QObject::connect() itself is thread-safe.

The Mandelbrot example uses a queued connection to communicate between a worker thread and the main thread. To avoid freezing the main thread's event loop (and, as a consequence, the application's user interface), all the Mandelbrot fractal computation is done in a separate worker thread. The thread emits a signal when it is done rendering the fractal.

Similarly, the Blocking Fortune Client example uses a separate thread for communicating with a TCP server asynchronously.

© 2016 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.

While the purpose of threads is to allow code to run in parallel, there are times where threads must stop and wait for other threads. For example, if two threads try to write to the same variable simultaneously, the result is undefined. The principle of forcing threads to wait for one another is called mutual exclusion. It is a common technique for protecting shared resources such as data.

Qt provides low-level primitives as well as high-level mechanisms for synchronizing threads.

Low-Level Synchronization Primitives

Qt Signal Slot Between Threads

QMutex is the basic class for enforcing mutual exclusion. A thread locks a mutex in order to gain access to a shared resource. If a second thread tries to lock the mutex while it is already locked, the second thread will be put to sleep until the first thread completes its task and unlocks the mutex.

QReadWriteLock is similar to QMutex, except that it distinguishes between 'read' and 'write' access. When a piece of data is not being written to, it is safe for multiple threads to read from it simultaneously. A QMutex forces multiple readers to take turns to read shared data, but a QReadWriteLock allows simultaneous reading, thus improving parallelism.

QSemaphore is a generalization of QMutex that protects a certain number of identical resources. In contrast, a QMutex protects exactly one resource. The Semaphores Example shows a typical application of semaphores: synchronizing access to a circular buffer between a producer and a consumer.

QWaitCondition synchronizes threads not by enforcing mutual exclusion but by providing a condition variable. While the other primitives make threads wait until a resource is unlocked, QWaitCondition makes threads wait until a particular condition has been met. To allow the waiting threads to proceed, call wakeOne() to wake one randomly selected thread or wakeAll() to wake them all simultaneously. The Wait Conditions Example shows how to solve the producer-consumer problem using QWaitCondition instead of QSemaphore.

Qt Signal Slot Main Thread

Note: Qt's synchronization classes rely on the use of properly aligned pointers. For instance, you cannot use packed classes with MSVC.

These synchronization classes can be used to make a method thread safe. However, doing so incurs a performance penalty, which is why most Qt methods are not made thread safe.

Risks

Qt Signal Slot Thread

If a thread locks a resource but does not unlock it, the application may freeze because the resource will become permanently unavailable to other threads. This can happen, for example, if an exception is thrown and forces the current function to return without releasing its lock.

Another similar scenario is a deadlock. For example, suppose that thread A is waiting for thread B to unlock a resource. If thread B is also waiting for thread A to unlock a different resource, then both threads will end up waiting forever, so the application will freeze.

Convenience classes

QMutexLocker, QReadLocker and QWriteLocker are convenience classes that make it easier to use QMutex and QReadWriteLock. They lock a resource when they are constructed, and automatically unlock it when they are destroyed. They are designed to simplify code that use QMutex and QReadWriteLock, thus reducing the chances that a resource becomes permanently locked by accident.

High-Level Event Queues

Qt's event system is very useful for inter-thread communication. Every thread may have its own event loop. To call a slot (or any invokable method) in another thread, place that call in the target thread's event loop. This lets the target thread finish its current task before the slot starts running, while the original thread continues running in parallel.

To place an invocation in an event loop, make a queued signal-slot connection. Whenever the signal is emitted, its arguments will be recorded by the event system. The thread that the signal receiver lives in will then run the slot. Alternatively, call QMetaObject::invokeMethod() to achieve the same effect without signals. In both cases, a queued connection must be used because a direct connection bypasses the event system and runs the method immediately in the current thread.

There is no risk of deadlocks when using the event system for thread synchronization, unlike using low-level primitives. However, the event system does not enforce mutual exclusion. If invokable methods access shared data, they must still be protected with low-level primitives.

Having said that, Qt's event system, along with implicitly shared data structures, offers an alternative to traditional thread locking. If signals and slots are used exclusively and no variables are shared between threads, a multithreaded program can do without low-level primitives altogether.

See also QThread::exec() and Threads and QObjects.

© 2020 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.